The SRM330 Lightweight Travel Surface Resistance Meter Kit

The SRM330 Surface Resistance Meter is the ultimate travel kit for testing materials for electrical re-sistivity/resistance according to EOS/ESD, CECC, ANSI, ASTM test procedures. The 9V battery powered SRM330 is equipped with built-in parallel electrodes for quick surface resistance measurements (table matting, floor matting, etc.) and includes two lightweight “travel” electrodes that eliminate the cumbersome weight of standard kits. When pressed, the travel electrodes simulate the 5lbs of pressure necessary to measure resistance point-to-point (RPP) or resistance-to-ground (RTG).

Features include:

• Easy-to-read color coded readout screen
• Two lightweight travel electrodes
• Built in resistivity probes
• Automatic test voltage selector
• Carrying case

The SRM330 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

For price and availability on the Ranger series constant monitors or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Resistance Ranger Dual Wire Constant Monitors

The Resistance Ranger Constant Monitors are an accurate and cost effective system to ensure that an ESD workstation station is grounded. The system continually monitors the resistance levels of wrist strap sets and alarm to indicate a failure.  The system uses superior dual wire wrist straps that provide two paths-to-ground to ensure ESD protection. The Rangers can also monitor the ground connection of the ESD worksurfaces and grounded tools.  All three models have conductive cases and use an ultra-low voltage sensing current. The Resistance Rangers are designed for use in the most sensitive environments and processes.

Three Models:       

RangerOneâ„¢ – p/n CM1601:   
This model is simplest and most economical constant monitor. It monitors the resistance of 1 person/wrist strap. Also provides a second unmonitored ground jack.

RangerTwoâ„¢ – p/n CM1602:   
This model monitors the resistance level of 1 person/wrist strap and the worksurface ground. Also provides a second unmonitored ground jack.

Rangerâ„¢ – p/n CM1600:   
Ranger is the premiere work station grounding system available. The Ranger monitors two wrist bands, two work surfaces, and two auxiliary grounds simultaneously. Also provides two additional unmonitored ground jacks .The Ranger has an output to hookup to an external alarm. The monitor is enclosed in a stainless steel conductive case.

Calibration
The Ranger Series is factory calibrated and does not require annual recalibration.  It is recommended to verify the monitors are in proper working order with the CM2015PV periodic verification unit.

Accessories
Cyclops^TM Operator Presence Check – CMREMOTE-IR
The Cyclops is an infrared sensor that causes the monitor to alarm when an operator approaches the workstation without connecting their wrist strap. The alarm continues until compliance is achieved.

CP3000 Wrist Strap Parking Station
Provides a jack that will allow an operator to disconnect and leave the dual conductor cord at the workstation without the wrist strap monitoring system alarm sounding. For use with mono plug coil cords.

Superior Technology
Resistance based monitoring is the only true wrist strap monitoring technology available.  Single wire systems simply detect that a person is wearing a wrist strap and put the monitor into an unalarmed state.  Resistance monitors actually measure the resistance of the wrist strap in combination with the person and alarm if the product exceeds preset levels. This accurate measurement ensures reliability.

Compatible Wrist Straps
WB2800 Series Two Snap, Dual Wire Wrist Bands
WB2695 Series One Snaps Dual Wire Wrist Bands
WB5000 Series Mono Plug Dual Wire Metal Wrist Bands
WB7000 Series Mono Plug Dual Wire Fabric Wrist Bands
*Most Standard Dual Wire Wrist Band Sets are Compatible with the CM1600, CM1601 and CM1602

For price and availability on the Ranger series constant monitors or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the GrooveSTAT ESD Conductive Floor Runner to our line of ESD Products.

Transforming Technologies GrooveSTAT Conductive Rubber Matting provides the electrical properties specified by ESDA standards for floor mats. A ribbed emboss provides a non-slip surface that provides excellent traction and allows the mat to be easily cleaned. The ribbed matting is also very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection. The material also offers moderate chemical resistance. The matting is 1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.For use with ESD footwear such as heel grounders and sole grounders.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies GrooveSTAT ESD Conductive Floor Runner:

• 100% conductive rubber: 10^3-10^5
• Corrugated v-groove surface allows for a superior traction and can easily be cleaned
• Available in rolls or an assortment of lengths.

Specifications of the Transforming Technologies conductive GrooveSTAT ESD Conductive Floor Runner:

• Point-to-point resistance: 10e3-10e5
• Mats or full rolls for floor runners
• Meet or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Transforming Technologies is proud to announce the addition of the ComfortTREAD Diamond Plate Anti-Fatigue Runner to our line of ESD Products.

ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable and your ESD sensitive equipment safe. The 100% conductive rubber mats are embossed with raised diamond-plate treads for superior traction and feature wide beveled borders to promote safety. A fully molded honeycombed cell design absorbs shock and cushions the feet from constant contact with hard surfaces. The mat will not separate, bubble-up, ripple, tear, compress or lose resiliency. Available in interlocking sections which can be quickly dismantled to make moving and cleaning easy. Two FM9E connected creates a 2.5′ x5′ workstation mat or you can pair the two FM9E with any number of FM9C pieces to create a runner in 30” increments. For use with ESD footwear such as heel grounders and sole grounders.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies ComfortTREAD ESD Matting:

• 100% conductive rubber: 10^3-10^5
• Diamond-plate treads for superior traction
• Interlocking sections create a 5’ long work-station mat or runners in 30” increments.
• Beveled borders for safety

Specifications of the Transforming Technologies conductive ComfortTREAD ESD Matting:

• Point-to-point resistance: 10e3-10e5
• Inlocking mats for floor runners
• Meet or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

ComfortTREAD Anti-Fatigue Interlocking Piece

ComfortTREAD Anti-Fatigue End Piece

For price and availability on the FM9 ComfortTREAD Anti-Fatigue Floor Runners or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the VinylSTAT ESD Chair Mat and Runners to our line of ESD Products.

Transforming Technologies VinylStat FM7 chair mats are the perfect solution for grounding chairs in an office or manufacturing environment. It is made of a rigid conductive vinyl that protects carpets from wear and tear while providing a path-to-ground for static charges.

Features:
The FM7 mats are a single layer of conductive vinyl, 0.090” thick, die cut to fit under typical desks. Surface resistivity is 10^3 – 10^6. Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

Benefits of the Transforming Technologies VinylStat FM7ESD Matting:

• Die cut rigid conductive matting allows chairs to be grounded
• High levels of flexibility
• Mat can be used in areas subjected to heavy traffic, most liquids & withstand wear and tear.

Specifications of the Transforming Technologies conductive Comfort GEL ESD Matting:

• Surface resistivity is 10^3 – 10^6. Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

VinylSTAT Conductive Runner

VinylSTAT Chair Mat

 For price and availability on the FM7 Conductive Runners or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the TileSTAT Interlocking Anti-Fatigue ESD Tiles to our line of ESD products.

TileSTAT Interlocking ESD Rubber Anti-FatigueTiles

TileSTAT Interlocking Rubber Anti-Fatigue ESD Tiles are a heavy duty, durable safety mat constructed of conductive nitrile rubber for use in even the harshest environments. TileSTAT mats feature a solid pebble embossed surface for improved traction, making this a good choice as a safety mat. The 3ft x 3ft interlocking mats fit together like a puzzle to create custom ESD workstations or complete room systems. The mats can be quickly dismantled to make moving and cleaning easy. Optional beveled borders can be added to the mats.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies TileSTAT Anti-Fatigue ESD Tiles:

• 100% conductive rubber: 10^4-10^6
• Solid top design for use in wet or dry locations
• Interlocking sections snap together to easily create custom workstations
• Optional yellow beveled borders for safety

Specifications of the Transforming Technologies conductive TileSTAT Anti-Fatigue ESD Tiles:

• Point-to-point resistance: 10^4-10^6
• Surface: Solid Top Pebble Emboss
• Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.

TileSTAT Interlocking Anti-Fatigue ESD Tiles

TileSTAT Interlocking Anti-Fatigue ESD Tiles (Underside)

TileSTAT Interlocking Anti-Fatigue ESD Tiles w/ Yellow Beveled Edges

For price and availability on the TileSTAT Interlocking Anti-Fatigue Tiles or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the StaticCare ESD Hand Lotion to our line of ESD Products.

Transforming Technologies is proud to announce the addition of the WB5600 Series Anti-Allergy Wrist Strap Set to our line of ESD Products.

Transforming Technologies is proud to announce the addition of the IN4000PE Flexible Neck Ionizing Nozzle to our line of ESD Products.

For price and availability on the IN4000PE Flexible Neck Ionizing Nozzle or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.