Shop

• ESD signs notify visitors and workers of the precautions necessary for these areas
• Sign reads: “Attention – ESD Control Area – Wear Grounding Devices At All Times – This Area Contains Sensitive Electronic Devices”.
• Designed for long-term use in an electronics production environment.
• Size: 17″x22″
• Sold in pack of five posters
• Made in the United States of America

• Line process trays with an ESD safe surface
• Provides cushioning and durability
• Fits a 16″x 24″x 0.060″tray
• Available in Light Blue, Royal Blue, Gray and Green

• ESD curtains are an ideal barrier wall for sensitive environments.
• Honeycomb conductive scrim grounds the static charges
• The curtains are sold in rolls that can be easily converted for your application

• Conductive ESD trash cans remove the static threat of plastic receptacles that can damage sensitive electronic devices.
• 44 gallon capacity
• Permanently conductive – will never lose ESD properties
• ESD symbol in yellow printed on body for easy identification
• Typical point-to-point resistance: 10^4 – 10^5 ohm

• 22 gallon capacity
• Permanently conductive – will never lose ESD properties
• ESD symbol in yellow printed on body for easy identification
• Typical point-to-point resistance: 10^4 – 10^5 ohm

• High-Visibility Teal color ESD jacket
• Medium-weight fabric- Perfect for all working environments
• Extremely durable – Certified “a groundable garment system” after 100 washing cycles
• Level 3 ESD Jackets – Complies with the highest standards
• Available in Light Blue, Black, Maroon, Teal and White

• Medium-weight ESD jacket – Perfect for all working environments
• Extremely durable – Certified “a groundable garment system” after 100 washing cycles
• Level 3 ESD Jackets – Complies with the highest standards
• Available in Light Blue, Black, Maroon, Teal and White

• Medium-weight ESD jacket – Perfect for all working environments
• V-Neck Collar and Snap Front Enclosure
• Three Snap Adjustment Sleeve
• Extremely durable – Still  groundable after 100 washing cycles
• Level 3 ESD Jackets – Complies with the highest standards
• Available in Light Blue, Black, and White

• Medium-weight ESD jacket – Perfect for all working environments
• V-Neck Collar and Snap Front Enclosure
• ESD Cuff allows for “Hands-Free” grounding
• Extremely durable – Still  groundable after 100 washing cycles
• Level 3 ESD Jackets – Complies with the highest standards
• Available in Light Blue, Black, and White

• Medium-weight ESD jacket – A durable jacket that is perfect for all working environments
• ESD Cuff allows for “Hands-Free” grounding
• Extremely durable – Still  groundable after 100 washing cycles
• Level 3 ESD Jackets – Complies with the highest standards
• Available in Light Blue, Black, Maroon, Teal and White

• Made with lightweight 8812 Series for maximum breathability
• 3/4ths length jacket cover more clothing
• Three snap adjustable sleeve
• Light Blue, White and Maroon

• Made with lightweight 8812 Series for maximum breathability
• 3/4ths length jacket cover more clothing
• ESD Knit Cuff allows for “Hands-Free-Grounding”
• Light Blue, White and Maroon

• Made with lightweight 8812 Fabric for maximum breathability
•  V-neck allows for maximum ventilation
• 3/4ths length jacket cover more clothing
• ESD knit cuff allows for “Hands-Free” grounding
• Light Blue, White and Maroon

• Made with lightweight 8812 Fabric for maximum breathability
•  V-neck allows for maximum ventilation
• 3/4ths length jacket cover more clothing
• Three Snap Adjustment Sleeve
• Light Blue, White and Maroon

• Made with lightweight “8812” polyester fabric
•  V-neck allows for maximum ventilation
• Available in Light Blue, White and Maroon

• Made with heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
• Waist-length ESD Jackets
• Three snap cuff for proper sleeve adjustment
• Conforms to ANSI/ESD 20.20

• Made with heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
• Waist-length ESD Jackets
• Three snap cuff for proper sleeve adjustment
• Conforms to ANSI/ESD 20.20

• ESD Safe Class 100 Cleanroom Frock
• Extremely Durable Cleanroom Fabric
• Contains a Conductive Grid That Reduces Static Generation
• Full-length lab coat – Covers More Clothing
• ESD Knit Cuffs
• Conforms to ANSI/ESD 20.20

• Heavyweight 5049 fabric – made with more cotton than traditional ESD jackets.
• Full-length lab coat – covers more clothing
• Three snap cuff for proper sleeve adjustment
• Conforms to ANSI/ESD 20.20

• Excellent static elimination performance
• Coverage Range: 1Â’ x 5Â’ area
• Uses AC technology to produce a balanced output of air ions:+10 volt
• Built-in emitter point cleaner
• Variable fan speed control
• Easy to clean and safe to access
• Removable finger guards with auto shut-off sensor

• Two fan overhead ionizer that quickly removes static charge
• Coverage area: 2’x3′
• Includes energy efficient LED lights
• Uses AC technology to produce a balanced output of air ions:+10 volt
• Built-in emitter point cleaner
• Variable fan speed control
• Easy to clean and safe to access

• 7 gallon capacity
• Permanently conductive – will never lose ESD properties
• ESD symbol in yellow printed on body for easy identification
• Typical point-to-point resistance: 10^4 – 10^5 ohm

• Ideal for Cleanrooms and other controlled environments
• 7-gallon capacity
• Made with permanently conductive stainless steel
• Typical point-to-point resistance: 10^2 – 10^3 ohm

• Rapid static elimination performance
• Wide Coverage Range: 3Â’ x 6Â’ area
• Uses AC technology to produce a inherently balanced output: ±10V
• Integrated heater
• Integrated emitter point cleaner
• Ionization status light

• Excellent static elimination performance
• Extended Coverage Range: 3Â’ x 6Â’ area
• Uses AC technology to produce a balanced output of positive and negative air ions.
• Integrated heater and emitter cleaner for ease of operator use.

• Three fan overhead ionizer that quickly removes static charge
• Coverage area: 2’x4′
• Includes energy efficient LED lights
• Uses AC technology to produce a balanced output of air ions:+10 volt
• Built-in emitter point cleaner
• Variable fan speed control
• Easy to clean and safe to access

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Pocket-size meter
• Verify Ionizer with EFM51.CPS “Charge Plate Set”
• Evaluate ionizer efficiency
• Measure static fields, potentials, and discharge times

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Storage bag including ground cable and clip
• Pocket-size
• Verify Ionizer with EFM51.CPS “Charge Plate Set”

• Measures static voltages within ±20kV (20,000V)
• Two LED guide ring lights help position the field meter
• Storage bag including ground cable and clip
• Pocket-size
• Verify Ionizer with EFM51.CPS “Charge Plate Set”

• Point-And-Shoot Precision Ionization
• Fast Static Decay Times with Excellent Balance
• Output Nozzle Tips Available to Change Airflow
• Single Integrated Air/Power Cable with Strain Relief That Protects Cables.
• Ergonomic Handle Design
• Filter Available to Ensure Clean Air

• Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
• Measures Voltage Generated on the Body While Walking
• Handheld, Portable Meter with Conductive Carrying Case
•  Also is a Fully Functional Field Meter – Measures Static Fields, Potentials and Discharge Times.

• Remove Static Charges Quickly and Efficiently
• Perfect for Single Station Table Top, Bench or Desk Use
• Small Footprint – Does Not Take Up Space
• Adjustment Limiting Design Locks in Correct Air Flow for Each Application
• Removeable Emitter Point Array and Fan Guards Makes Service and Maintenance a Breeze
• Standard Products Works on All Power Circuits: 100-240v

• Remove Static Charges Quickly and Efficiently
• Perfect for Single Station Table Top, Bench or Desk Use
• Small Footprint – Does Not Take Up Space
• Variable Fan Speed
• Standard Products Works on All Power Circuits: 100-240v

WBASDM – Conductive Metal ESD Trash Can Dolly

• ESD inspection gloves won’t leave finger prints or contamination
• Palm coated with micro-foam polyurethane
• Seamless nylon and conductive carbon nylon knit.
• Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
• Reusable. Machine washable

• Quickly and Easily Test Surface Resistivity & Static Fields
• Portable, Handheld Devices in a Lightweight Conductive Case
• Takes The Basic Measurements Needed for an ESD Program

• Flexible neck allows you to optimally position airflow.
• Multiple nozzle options to customize airflow for your specific application.
• Hands-Free operation with foot pedal operation
• Optional .01 micron filter for clean air
• Ionization (green) and HV alarm (red) lights.
• No periodic adjustments.

• Flexible neck allows you to optimally position airflow.
• Multiple nozzle options to customize airflow for your specific application.
• Hands-Free operation with foot pedal operation
• Optional .01 micron filter for clean air
• Ionization (green) and HV alarm (red) lights.
• No periodic adjustments.

• ESD inspection gloves won’t leave finger prints or contamination
• Palms are coated with micro-foam polyurethane dots for grip
• Seamless nylon and conductive carbon nylon knit.
• Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
• Reusable. Machine washable

• Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5.
• Measures Voltage Generated on the Body While Walking
• Body Voltage is Displayed on Meter as well as Live Via a Computer
• Easy to use Analysis Software to Save, Measure, Print and Export Tests

• ESD inspection gloves won’t leave fingerprints or contamination
• Fingertip coated with micro-foam polyurethane
• Seamless nylon and conductive carbon nylon knit.
• Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
• Reusable. Machine washable

• Take Precise Temperature and Humidity Measurements
• One Button Operation
• Mountable: Built-in 1/4” Tripod Thread
• Temperature: -30…+70°C (± 0,5°C at -10…+70°C)
• Humidity: 0 … 100% (± 3% at 20…80%)

The IN5130 overhead ionizing blower combines exceptionally fast static decay capability with excellent balance stability, without taking valuable workspace.

• ESD inspection gloves won’t leave finger prints or contamination
• Uncoated for maximum breathability
• Seamless nylon and conductive carbon nylon knit.
• Resistance: 10^6 – 10^8 per ANSI/ESD SP15.1.
• Reusable. Machine washable

• Hand probe are designed to evaluate ESD flooring according to ANSI ESD20.20
• Made from rugged stainless steel
• Banana plug socket for connection to the testing meter
• Compatible with Surface Resistance Meters and Walking Test Kits

• Clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20
• Wide steel clamps ensures excellent contact with fabric
• Made from rugged stainless steel
• Banana plug socket for connection to the testing meter

• Have static control and heat resistance in one glove
• Gloves resist up to 302°F(150°C)
• 100% inner tricot knit polyester fabric liner
• Clean room safe
• Cuff mounted Grounding snap

• A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.
• Concentric ring with conductive rubber (R < 5 ohm) with silver particles
• Take resistance-to-ground, point-to-point and volume resistance measurements
• Include stainless steel plate, insulative plate, and a conductive carrying case

• Two-sided probe combines a concentric ring and disk probe
• Made with conductive plastic containing silver particles
• Take resistance-to-ground, point-to-point and volume resistance measurements
• Include stainless steel plate, insulative plate, and a conductive carrying

• Resists Heat Up to 572F
• Made with Nomex® Fabric
• Cleanroom Compatible
• Static Dissipative

SR0065 5lb Surface Resistance Probes

• Have static protection and high heat protection in a clean room compatible glove
• Resists Heat Up to 572F (300C)
• Made with Heat Resistance Nomex® Fabric with ESD Carbon Yarns
• Cleanroom Compatible
• Static Dissipative

• Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
• Test range: 10^3-10^12
• Stores test data that can be accessed via USB 
• Measures temperature and humidity
• Test voltage: 10V/100V(automatic ranging)
• Built-in resistivity probes
• Carrying case & calibration certificate included

• Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
• Test range: 10^3-10^12
• Stores test data that can be accessed via USB 
• Measures temperature and humidity
• Test voltage: 10V/100V(automatic ranging)
• Built-in resistivity probes
• Carrying case & calibration certificate included

• Have static protection and high heat protection in a clean room compatible glove
• Resists Heat Up to 572F (300C)
• Made with Nomex® Fabric
• Cleanroom Compatible
• Static Dissipative

Warmbier SRM110 Pocket Digital Surface Resistance Test Kit

• Perform resistance tests to evaluate items for ESD compliance
• Test range: Low ohmic range: 1 to 10 kOhm – 199 GOhm
• Comes with 5lb probe set with innovative extension handle
• Comes in conductive case with handle

• Premium 0.080″ thick ESD table mats protect your sensitive items as well as your work surface.
• Excellent resistance to hot solders, soldering irons and most solvents
• Available in 50ft rolls or an assortment of Ready-Made Table Mats
• Colors: Nasa Blue, Royal Blue, Green, and Gray

• Durable 0.060″ Thick Two Layer Rubber
• Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
• Available in 50ft rolls or an Assortment of Ready-Made Table Mats
• Nasa Blue, Royal Blue, and Gray

• Durable 0.080″ Thick Two Layer Rubber
• Non-Slip Textured Surface
• Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
• Available in 40ft rolls or an Assortment of Ready-Made Table Mats
• Nasa Blue, Royal Blue, and Gray

VinylStat A is the ultimate in static dissipative flexible surfaces. A solid vinyl, homogeneous construction with a buried conductive layer gives VinylStat A its superior physical and unsurpassed electrical qualities.

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat C a consistent, controlled static drain and physical properties with highest level of protection.

A homogeneous polymer mix construction with unsurpassed electrical properties, gives VinylStat D a consistent, controlled static drain and physical properties with highest level of protection.

• Provides extra cushion for component safety and operator comfort.
• Thickness: 0.375″
• Three layers vinyl with excellent ESD protection
• Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
• Light Blue
• Available in rolls or cut mats

• Extremely durable ESD mat that protects your sensitive items as well as your work surface
• Compatible with  cleanrooms: Ultra-low outgassing, non-VOC, non-blooming and No Particle Generation
• Made with IDP-STAT Alloy – a permanently dissipative elastomer for consistent resistance for the life of the mat
• Available in 75ft rolls or an assortment of ready-made table mats
• Transparent – can be used as softwalls to separate work areas in controlled environments such as cleanroom and data centers

• Available in Various Sizes of Ready-Made Table Mats
• Durable 0.080″ Thick Two Layer Rubber
• Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
• Nasa Blue, Royal Blue, Green, and Gray

• Comes with Everything Necessary for a Static Safe Work Area
• Durable 0.080″ Thick Two Layer Rubber
• Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents
• Nasa Blue, Royal Blue, Green, and Gray

• Ensures Excellent Contact During Evaluations of ESD Gloves
• Rugged Metal Probe
• 4mm Banana Plug Socket Connection
• For Use With Resistance Meters

Warmbier 900 Backrest Probe

• Easy-to-read color coded readout screen
• Two lightweight “Press & Test” travel electrodes
• Built in resistivity probes
• Automatic test voltage selector
• Carrying case

• Pocket-Sized Digital Surface Resistance Test Kit
• Test range: 10^3-10^12
• Test voltage: 10V/100V(automatic ranging)
• Accuracy + 5%
• Built-in resistivity probes
• Carrying bag

SR0055 5lb Surface Resistance Probes

• Provides extra cushion for component safety and operator comfort.
• Three layers vinyl with excellent ESD protection
• Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
• Light Blue or Gray
• Available in rolls or cut mats

• Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance
• 10v and 100v range voltage selection
• Automatic zeroing and power shut off
• Tests temperature and humidity
• Two 5 lb disk probes
• Built-in resistivity probes
• Carrying case

• Provides an Anti-Fatigue, Energizing Surface to Stand On.
• Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance.
• Available in single work area mats- sizes: 2’x3′ or 3’x4′ or in interlocking sections for long assembly lines.
• The mat is 1/2″ thick.
• 100% Conductive Rubber Complies with ANSI ESD20.20

• Durable vinyl mat provides a rigid ESD floor runner or chair mat
• Specially spaced diamond treads on the surface of the mat provide excellent traction
• Available full rolls or floor runners in custom lengths
• Wide beveled borders to promote safety
• Surface Resistivity is 10^8 – 10^9.

• Provides an Anti-Fatigue, Energizing Surface to Stand On.
• Specially spaced diamond treads on the surface of the mat provide excellent traction
• Available in interlocking sections to create runners in custom lengths
• Wide beveled borders to promote safety
• 100% Conductive Rubber Complies with ANSI ESD20.20

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

• Measure electrostatic fields
• Measure surface resistance
• Analyze ionizers performance
• Evaluate packaging materials
• Evaluate garments
• Measure flooring, work surfaces and furniture resistance
• Measure temperature and relative humidity

Kit that includes the relevant test instruments and equipment needed to perform ESD audits

• Measure electrostatic fields
• Measure surface resistance
• Analyze ionizers performance
• Evaluate packaging materials
• Evaluate garments
• Measure flooring, work surfaces and furniture resistance
• Measure temperature and relative humidity

• Perform resistance tests to evaluate items for ESD compliance
• Test range: Low ohmic range: 1 to 10 kOhm
  High ohmic range: 1 KOhm to 1.2 TOhm
• Store up to 50,000 test values and create reports with included software
• Results displays on LCD screen
• Comes with 5lb probe set and hand probe
• Comes in conductive case with handle
• Tests Temperature and Humidity

• Reduces worker discomfort by providing a soft surface to stand on.
• Provides a path-to-ground for ESD footwear
• Available in workstation mats, or full rolls for long runners
• High grade 3/8″ thick closed cell PVC sponge for comfort and durability.
• Available in gray or brown

• Combination static field meter and ion balance tester
• Four button operation
• Digital display with numerical readout and bar graphs
• Two LED guide ring lights help position the field meter
• Pocket-size
• Meets ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

• Verify ESD meters are calibrated and in proper working order
• Precision resistor box
• Passive – Does not require power
• Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others.

• Made with rubberized gel foam for maximum softness and cushioning
• Exceptional comfort and long-term performance
• Static dissipative
• Specially formulated antimicrobial and antibacterial material to promote cleanliness
• Washable to clean room level 100

• Verify that the PDT700K and PDT800K combo tester are operating correctly.
• Resistance Box with Fixed 5% Precision Resistors
• Selectable Test Range of 100K~1G.

• “Near-Fail” LED Indicator.
• LCD Readout Screen Gives Actual Test Result Number.
• Tests Wrist only; Foot only; or Both Wrist and Foot.
• 100% Independently Test the Left-Foot and the Right-Foot.
• Selectable Test Range of 100K~1G.

• A v-groove emboss provides a non-slip surface that provides excellent traction
• Provides a dissipative ESD surface that protects the floor beneth.
• Very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection.
•  1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.

• A ribbed emboss provides a non-slip surface that provides excellent traction
• Provides the electrical properties specified by ESDA standards for floor mats.
• Very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection.
•  1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.

• Heavy duty, durable ESD mat constructed of conductive nitrile rubber
• For use in general use or harshest environments.
• Solid pebble embossed surface for improved traction
• 3ft x 3ft interlocking mats fit together like a puzzle to create custom ESD workstations or complete room systems.
• The mats can be quickly dismantled to make moving and cleaning easy.
• Optional 3″ wide beveled borders can be added to the mats.

• Low-compression ESD modular tile – 20″x20″x1″
• Capable of tolerating the heavy loads and harsh conditions associated with industrial environments
• Diamond-plate emboss surface
• Optional yellow beveled borders for visibility and safety

• Continuously Checks One Single Wire Wrist Strap
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• “Near-Fail” LED Indicator.
• Tests Wrist only; Foot only; or Both Wrist and Foot.
• 100% Independently Test the Left-Foot and the Right-Foot.
• Selectable Test Range of 100K~1G.

• Monitors One Operator and One Workstation Mat
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• Tests both ESD wrists straps and ESD footwear such as shoes and heel grounders to determine if the grounding device is functioning correctly.
• Split footplate design test both feet simultaneously and independently
• Durable sleek black frame and molded footplate
• Wrist Strap Range 750 kilohm –10 megohm
• Footwear Range 750 kilohm – 100 megohm*
• Gives both Low and High failure alarm modes
• This tester fully supports the “Compliance Verification Plan” requirements as stated in the ANSI ESD S20.20.

• Monitors Two Operators and One Workstation Mat
• Easy To Use: Simply Plug In Wrist Strap
• Audible and Visual Alarms
• Factory Calibrated with Certificate – Does Not Require Recalibration

• Quickly Eliminate Static Charges in Localized Areas without Airflow
• Effective ionization range: 12″
• Ideal Where Space Is Limited and Installed Inside Equipment
• Easy Adjustment and Calibration

• Provides accuracy and reliability at the best value
• Dual test circuits: test footwear or wrist straps
• Positive rocker switch LED’s lights and audible alarm signal test results
• Battery powered with low-battery indicator
• Provided with NIST traceable certificate

WST200 – ESD Wrist Stap Tester

• Verify PGT120 ESD testers are calibrated and in proper working order
• Precision resistor box
• Passive – Does not require power

• Monitors one dual wire wrist strap
• Uses resistance based monitoring technology
• Easy to use and economical
• Audible and visual alarm indicators

• Monitors one dual wire wrist strap and one worksurface
• Uses resistance based monitoring technology
• Easy to use and economical
• Audible and visual alarm indicators

• Monitors: Two wrist straps; Two work surfaces; Two auxiliary grounds
• Accurate dual conductor resistance monitoring technology
• Ultra-low voltage signal
• Conductive ESD-safe case
• Audible and visual alarms
• Calibration certificate included
• For use with Dual Wire Wrist Straps

• Monitors two dual wire wrist straps and two worksurfaces
• Uses resistance based monitoring technology
• Ultra-low voltage signal
• Conductive metal case
• Audible and visual alarm indicators
• Network-ready for use in the Boss-See system

• A “Smart” ESD Combo tester that integrates with a computer to record test results into a database
• Can work with many other devices such as door/barrier system, label printer, RFID and more
• Independently test footwear & wrist strap grounding products
• Automatically test footwear in hands-free mode
• 100volt test circuit (by default) which is the same voltage used for qualification tests.

• Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage
• Uses resistance based monitoring technology
• Ultra-low voltage signal
• Conductive metal case
• Alarms are selectable with software
• Network-ready for use in the Boss-See system

• Quickly and easily test ESD footwear and wrist straps
• Can test ESD footwear hands-free by just stepping on the footplate
• Audibly and visually signal a “Pass”, “High-Fail” or “Low-Fail”
• Tests both feet simultaneously and independently to save time
• Can be integrated with turnstiles and other barrier systems.
• 100volt test circuit (by default) which is the same voltage used for qualification tests.

• Periodic Verification Tool for the Resistance Ranger Constant Monitors
• Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications
• Resistor Box Containing 5% Fixed Precision Resistors

• Periodic Verification Tool For CM400 and CM410
• Verfies that the constant monitor is in proper working order.
• Factory calibrated.  No recalibration required.
• Comes with Certificate.

• Periodic Verification Tool For CM420 Constant Monitor
• Simulates Passing / Failing Wrist Straps and Worksurfaces
• The Tool Verifies That The Constant Monitors Are Working Properly

• Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor
• More durable than plastic version

• Provides a jack to “park” your wrist strap when you need to leave the workstation
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

• CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor
• Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap
• Assure compliance with personnel grounding requirements and protect ESD safe workstations
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

• ESD label printed with “Caution Computer Material Enclosed Do Not Bend or Expose To X-Rays. Excessive Heat, Cold or Humidity Radioactive Materials. Static Electricity of Magnets. Exposure To Any Of The Above May Destroy Contents”
• Size: 1-1/2″ x 3″, 3″ x 5 “
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required”
• Size: 1-3/4″ x 2-1/2″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations”
• Size: 1-3/4″ x 2-1/2″, 4″ x 4″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic or Radioactive Fields”
• Size: 4″ x 4″, 2″ x 2″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required. Contents: ______”
• Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations”
• Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices”
• Size: 2″ x 2″, 4″ x 4″
• Permanent adhesive
• 500 per roll

• ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices”
• Size: 2″ x 2″, 4″ x 4″
• Permanent adhesive
• 500 per roll

• ESD label printed with “This Station or Equipment is Static Safe”
• Size: 1-3/4″ x 3″
• Permanent adhesive
• 500 per roll

ESD Label: “Electrostatic Sensitive Devices Do Not Open or Handle Except At A Static Free Workstation” Size: 1″ x 2-1/2″

ESD Label: ” Attention Sensitive Devices Handle Only At Static Safe Work Stations”. Size: 5/8″ X 2″

ESD Label: “Attention Electrostatic Sensitive Devices”. Size: 3/8″ X 1-1/4″

ESD Label: “Attention Observe Precautions for Handling Electrostatic Devices” Size: 5/8″ X 2″

ESD Label: “Caution Sensitive Electronic Devices Do Not Open Except at Approved Field Force Protective Work Station” Size: 5/8″ X 2″

ESD Label: “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic, Fields” Size: 5/8″ X 2″

• Dissipative trash liners for ESD protection
• 44 gallon capacity
• Average surface resistivity is less than or equal to 10^11 ohms per square
• Static decay rate is less than two seconds.
• Sold in packs of 50 liners

• Dissipative trash liners for ESD protection
• 22 gallon capacity
• Average surface resistivity is less than or equal to 10^11 ohms per square
• Static decay rate is less than two seconds.
• Sold in packs of 100 liners

• Dissipative trash liners for ESD protection
• 7-10 gallon (28-40 Quart) capacity
• Average surface resistivity is less than or equal to 10^11 ohms per square
• Static decay rate is less than two seconds.
• Sold in packs of 100 liners

• Conductive black trash liner
• 44 gallon capacity
• 4 Mil Thickness
• Safely dispose of waste materials that pose a static damage threat.
• Sold in packs of 50 liners

• Conductive black trash liner
• 22 gallon capacity
• Safely dispose of waste materials that pose a static damage threat.
• Sold in packs of 100 liners

• Conductive Black Trash Liner
• 28 – 40 Quart (7 – 10 Gallon )
• Safely dispose of waste materials that pose a static damage threat.
• Sold in packs of 100 liners

• Made of volume loaded conductive polystyrene
• Tray compatible size combination
• Spring loaded lid
• Complies with EN 61340-5-1
• Suitable for compartmented box type SMD810
•  Color: Black
• Recyclable

• Made of volume loaded conductive polystyrene
• Tray compatible size combination
• Spring loaded lid
• Complies with EN 61340-5-1
• Suitable for compartmented box type SMD810
•  Color: Black
• Recyclable

• Made of volume loaded conductive polystyrene
• Tray compatible size combination
• Spring loaded lid
• Complies with EN 61340-5-1
• Suitable for compartmented box type SMD810
•  Color: Black
• Recyclable

• Bemcot wipers are for quick and easy wiping in cleanrooms and other working environments that demand the lowest levels of lint and particles
• Made out of cotton into a proprietary 100% filament rayon that absorbs 13 times its weight in liquid
• Nonwoven, soft, and low-linting wiper with excellent antistatic and heat resistance properties
• Used in semiconductor, optical, medical, cosmetics, food & beverage, printed circuit boards, building maintenance, automobile, aircraft, LCD, magnetic tapes, oil, tools, equipment, glass, optics, etc.

• Static dissipative ESD wipes for all electronic manufacturing and optical cleaning applications
• Complies with ANSI/ESD S20.20 ( per ANSI/ESD S11.11 & ANSI/ESD DS11.12 )
• 100% knitted polyester
• No carbon or metal fibers
• Less than 100 volts tribo-charge
• Good solvent resistance, lint free

• ESD Safe Microscope Cover
• Does not produce a significate static charge – ESD Safe!
• Helps to keep microscopes free of dust
• Permanently anti-static – Less than 10^6
• Made with polyester and conductive yarn
• Size: 10.25

• Provides ESD protection for sensitive processes and components
• Groundable for added safety – 4MM Snap
• Made with polyester with conductive yarn
• ESD-safe logo designates safe to use in ESD protective environment
• Resistance less than 10^5
• Bound edges

• Conductive rubber bands are specially manufactured to handle the problem of static in the semiconductor and electronics industry.
• Conductive rubber bands are use to bundle and protect ESD sensitive IC tubes, trays, boxes and carriers quickly and safely.
• Made with Vulcanized Natural Rubber
• Surface Resistivity: 10^6 ohms/sq
• Static Decay Rate: Less then 2 sec
• Meets or exceeds requirements of ANSI ESD-S20.20

• Anti-Static rubber bands are use to bundle and protect ESD sensitive IC tubes, trays, boxes and carriers quickly and safely.
• Made with Vulcanized Natural Rubber
• Surface Resistivity: 10^9 ohms/sq
• Static Decay Rate: Less then 2 sec
• ESD Shelf Life: Approximately one year
• .Meets or exceeds requirements of ANSI ESD-S20.20

• ESD safe clear cellulose tape with ESD Symbols in black print
• 2.4 mil thick tape
• Charge decay of <.014 seconds.
• Available on 3″ cores in widths of 1/2″, 3/4″, 1″ and 2″ (70 meters / 229′ in length).
• Used for general purpose mending, binding packaging and carton sealing.

• Made with permanently dissipative IDP-STAT® PVC film
• Lightly embossed to reduce glare
• Resistant to print transfer
• Yellow stripe with ESD identification
• Typical Surface Resistivity: 10^9 – 10^10
• 9-Hole Punch.ectors – Nine Hole Punch

• ESD safe pen compatible with clean rooms and other controlled areas
• Printed with an ESD symbol in yellow
• Fine point
• Available with black, blue and red
• Sold in 10 packs.

• Allows for improved contact between a persons skin and grounding device
• Contaminant-free to keep work station ESD safe
• Contains aloe vera, natural moisturizers, and vitamins to promote happy and healthy skin
• Non-greasy formula will not interfere with grip or agility
• Clean and refreshing scent

• ESD-safe tool carrier provides static-safe storage of tools and components
• Made from conductive Polypropylene plastic
• Surface resistivity: <10^5
• Storage can be divided with up to four optional tray inserts

Cl Series Anti-Static Cellulose Tape – Four Sizes

Guardian Grid – CT Series Conductive Grid Tape

• Bright yellow vinyl floor tape with bold black ESD symbols
• Print reads “ESD: Safeguarded Work Area” with ESD symbol
• 2″ and 3” wide rolls available in lengths of 36 yards.

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes a FM2000 ground/coil combo cord
• Comes with an WB0016 adjustable blue fabric wrist strap

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes a ground/coil combo cord
• Comes with an adjustable blue fabric wrist strap

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes 1 CP1518BD ground cord with a bull dog clip
• Comes with the WB1637  adjustable blue fabric wrist strap set

• Complete kit for servicing ESD items in the field
• Size: 24″ x 24″ with two 8″ x 12″ pockets
• Includes 1 FM2000 ground cord with a bull dog clip
• Comes with the WB1637  adjustable blue fabric wrist strap set

• ESD socks ensure electrical contact between the body and ESD footwear.
• Toe and heels of the socks are reinforced with conductive yarn.
• Made with polyester, spandex and conductive yarn.

• Permanently Dissipative – ESD Properties will Never Expire
• Resistance: 10^9-10^10
• Hot Stamped with ESD Symbol
• Credit Card Size – Fits Most IDs, Business cards and Key Cards.
• Made from IDP-STAT® Dissipative PVC
• Comes in packs of 10

• Kit for grounding ESD table mats
• Includes 15ft low profile ground cord, and a universal snap
• Can be installed with a Philips head screw driver.
• Snap includes two screw lengths for thick or thin material

• Kit for grounding ESD floor mats
• Includes 15ft low profile ground cord, and a universal snap
• Can be installed with a Philips head screw driver.
• Snap includes two screw lengths for thick or thin material

CP1518 Common Point Ground, 15Â’, 10mm Male, 1 meg

• Common Point Ground
• Bull Dog Grounding Clip for Connection to Ground
• Length: 15ft
• 10mm Female Snap
• Has Two Banana Jacks for Coil Cords

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm male snap
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm male snap
• Length: 15ft long
• Does not include a resistor (available with a 1meg resistor – CP2522 ground cord )
• Cords available with both male studs and female sockets

• Common point ground cord for two wrist straps and ESD mat
• Low profile molded head with 10mm female snap
• Length: 15ft long
• 1meg resistor for safety (available without resistor)
• Cords available with both male studs and female sockets

• Dual bench ground mount for single wire wrist straps
• Mounts under workbench and can ground two operators
• Made of heavy duty 0.05 inch anodized aluminum with 15 feet ground wire

CP4822: Quad Common Point Ground Cords

FM1500 Series: Low Profile Floor Mat Ground Cords

FM2000 Center Snap Common Point Ground Cord System

AC100 – Alligator Clip

• Universal snap kit easily installs a ground point into a range of mat thicknesses 
• User installable with a screwdriver
• Installs a 10 mm snap or stud to ESD workstation materials
• Includes 2 screws for thick and thin materials
• 1 each: 10 mm socket, 10 mm stud, washer and screw base

CS0122-Stud – Rivet Ground Snap – Stud

• Installs a 10mm stud into ESD workstation materials
• Creates a solid connection with wide screw base that sandwiches the material
• Quickly un-installs so you can reuse the snap

CS0122-Socket – Rivet Ground Snap – Socket

CS125 – Ring Terminal Banana Jack

CS126 Series Stacking Snap Adpaters

• Add a banana jack to any surface with a 10mm ground snap..
• Molded plastic body with metal snaps
• Most most banana plugs will fit the jack
• Use with coil cords, wrist strap sets, common point grounds and constant monitors
• Universal Snap:  Side 1: 10mm Male Stud; Side 2: 10mm Female Socket

• Snap adapter that connects a 10mm socket to a 10mm socket
• Compatible and interchangeable with all major manufactures of 10mm snaps
• Stainless steel

• Snap adapter that connects a 10mm stud to a 10mm stud
• Compatible and interchangeable with all major manufactures of 10mm snaps
• Stainless steel

CS128 Snap Adapter Set

• Push and Clinch grounding snaps for ESD materials
• Reusable snaps can be installed and un-installed by bending prongs.
• 10mm (3/8”) snap size fits standard ESD equipment.
• Male or Female snap

AD22 Banana Jack Outlet Adapter

• Buckle closure for tight fit
• Durable molded resistor for safety
• 35 mm reversible cup design increases heel grounders life
• Made with durable ESD rubber

• D-ring closure
• Durable molded resistor
• 35 mm cup design

• Standard Blue Velcro ESD Heel Grounder
• Hook and loop velcro closure
• Buried resistor
• 1.25″ cup design

• Reversible Cup Design Allows for Longer Life
• Stretch Velcro Strap Creates a Secure Fit Around Shoe
• Buried 1meg Resistor
• Available in Black, Red, Blue, and Orange

• Non-Marketing ESD Heel Grounder
• Made with ESD gray rubber that will not leave marks on floors
• Stretch velcro closure straps ensure a solid fit
• High visibility blue color
• 1 meg resistor for safety

• Hi-Vis Yellow Velcro ESD Heel Grounder
• Velcro with elastic ensures a tight, comfortable fit
• Buried 1meg resistor for safety
• Reversible 1.25″ cup design extends life

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A velcro closure ensures a tight and comfortable fit on the shoe
• Made with ESD gray rubber that will not leave marks on floors
• 1 Meg resistor

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A buckle closure makes it easy to put on and take off
• High visibility rep color
• 1 Meg Resistor

• Sport Heel Grounders are ideal for boots and cross-training athletic shoes
• Moldable back strap which better grips shoes for a tighter fit
• A velcro closure ensures a tight and comfortable fit on the shoe
• High visibility rep color
• 1 Meg Resistro

• Perfect Fit for Odd Shaped Footwear Such as High Heels or Small Shoes
• Elastic Closure
• Molded Resistor

• Low Cost Method of Grounding Temporary Personnell
• High Visibility Yellow Color
• Sold In Packs of 100
• Disposable: Perfect for One Time Use

• Low Cost Method of Grounding Temporary Personnell
• High Visibility Yellow Color
• Sold In Packs of 100
• Disposable: Perfect for One Time Use

• Full coverage sole grounders – 20 times the surface contact of heel grounders
• Wider and more consistent contact area ensures grounding
• Rapid and complete static dissipation due to constant contact through entire walking motion
• Longer life than heel grounders
• Available in XS,S, M and L sizes with one or two meg resistors

Benefits:

• Lightweight and ergonomic
• Excellent conductivity
• For use in cleanrooms
• Water repellent
• Optional vents
• Black or white colors

• Disposable Clean Room Shoecover
• Conductive Black Strip
• Economical one-time-use cover
• Packs of 300

• Made with Soft and Comfortable Woven Fabric
• Hypoallergenic Fabric Band
• Coil Cord is Durable and Has Excellent Coil Memory
• Versatile and Cost Effective Method of Grounding

WB2600 Series Single Wire Wrist Band & Coil Cord Set

WB4000 Series Wrist Band & Coil Cord Set – 6ft, 12ft cords; Machined 4mm snap

WB5600 Series Anti-Allergy Wrist Band & Coil Cord Set – 4mm snap, 6ft or 12ft coil cord

• Metal wrist band & coil cord – Metal expansion band; 6ft, 12ft or 20ft cords
• Clean room compatible Speidel band
• 4mm snap that fits most common coil cords
• Available with straight or right angle coil cords

WB8000 Wrist Band & Coil Cord Set Series -Fabric Clasp band; 6ft, 12ft cords

• Durable metal expansion wrist band
•  Insulating outer surface and stainless steel inner surface
• Comes with a 6ft, 12′, 20′ coil cord or as a band only
• Small, Medium, Large or Adjustable

WB5407 Disposable Wrist Band

• “Two-snap” dual wire wrist strap with two 4mm snaps
• For use with dual wire resistance constant monitors
• High-quality red fabric adjustable wrist band
• Packaged with a dual wire coil cord with two 4mm snaps in 6′ or 12′ lengths

• Premium metal expansion wrist strap with more reliable path-to-ground
• Durable metal band - Long wearing, easy to clean
• Superior contact with skin
• Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, operator has reliable path-to-ground with other wire
• Meets requirements of ANSI/ESD S20.20 and ANSI/ESD S1.1
• 3.4mm plug size
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.
• Fixed sized bands available in three sizes

WB7000 Series Dual Conductor Fabric Wrist Band and Coil Cord Set

CC3000R Dual Conductor Right Angle Coil Cord – 5ft; 10ft and 20ft lenghts

• Premium Straight Coil Cords
• 4mm Snap
• Length: 20′, extended
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

• Premium Straight Coil Cords
• 4mm Snap
• Length: 6′, extended
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

• 9000 Series Premium Straight Coil Cords Series: 6′, 12′ and 20′ Lengths – 4mm, Snap – Black
• Length: 6′, extended; 12,extended;20 extended;
• Resistor: 1 meg ohm
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type
• 4mm Snap

9000R Premium Right Angle Coil Cords Series: 6′, and 12′ Lengths – 4mm, Snap – Black

• Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.
• 3.4mm straight mono plug
• One megohm series resistor
• Superior resistor connection strain relief
• Exceeds ANSI/ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirements.
• Dual Conductor Coil Cord – 5ft; 10ft and 20ft lengths
• Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies.

• “One Snap” Dual Wire Design Contains Two Snaps in a Molded Head
• Innovative Parking Jack To Hold Coil Cord Plug
• For Use with Dual Wire Resistance Constant Monitors
• Length: 5′, 10′, and 20′ extended
• Resistor: 1 meg ohm
• Flex Life: > 20,000 flexes
• Color: Blue, black
• Banana: 3.5 mm phono plug*

CC2080 Series Two Snap Dual Wire Coil Cords: 6′, and 12′ Lengths – 4mm

• Cord use to connect two items together
• Each end terminates with a standard banana plug
• Length: 8′
• Resistor: No Resistor.
• Flex Life: > 50,000 flexes
• Color: Black
• Banana: Swivel type

CC3000NR Interconnect Two Banana Coil Cord with No Resistor

• Coil cords for grounding people and items in an ESD protected area.
• Length: 6′, extended or 12′, extended
• Snap Size: 4 mm, 7mm and 10mm
• Resistor: 1 meg ohm standard, 270K ohm and 0 meg ohm are also available.
• Flex Life: > 50,000 flexes
• Cord Color: Black
• Banana: Swivel type – Fits standard banana jacks

• Provides uniform static elimination at high speeds.
• AC Square Wave Technology  – AC stability with DC control
• Quickly and efficiently controls static in mini-environments, laminar flow hoods and wide-area workstation applications.
• It is a highly effective tool in electronics, plastics, chemicals, printing, textile, optical and other industries.
• Available in 12in, 22in., 44in. or 64in. lengths.

• Flexible neck allows you to optimally position airflow.
• Hands-Free operation – With Photo Electric Eye
• Multiple nozzle options to customize airflow for your specific application.
• Mountable
• Optional .01 micron filter for clean air
• No periodic adjustments.

• Flexible neck allows you to optimally position airflow.
• Multiple nozzle options to customize airflow for your specific application.
• Hands-Free operation – With Photo Electric Eye
• Optional .01 micron filter for clean air
• Ionization (green) and HV alarm (red) lights.
• No periodic adjustments.

• Remove Static Charges Quickly and Efficiently
• Perfect for “In Tool” Applications or Single Station Use
• Small Footprint – Does Not Take Up Space
• Variable Fan Speed
• Standard Products Works on All Power Circuits: 100-240v

• Physically small and light, can be mounted in hard to reach areas.
• Suitable for pinpoint, high-pressure air purging static elimination
• Multiple nozzle options to customize airflow for your specific application.
• Optional .01 micron filter for clean air
• A proximity sensing photoelectric eye controls the power and air flow for easy hands free ionization.

• Physically small and light, can be mounted in hard to reach areas.
• Suitable for pinpoint, high-pressure air purging static elimination
• Multiple nozzle options to customize airflow for your specific application.
• Optional .01 micron filter for clean air

Change airflow of IN3425, IN3425PE, IN4000, IN4000PE and IN6430 ionizers with output nozzles tips

• 15° Angle
• Wide Angle
• Luer Lock
• Long Range
• Bendable
• Manifold

• 0.01μm Hollow Fiber Micro Filter
• Excellent Particle Removal Efficiency
• Compact and Light Weight
• Quick and Convenient Filter Change
• Use with IN3425, IN3425PE, IN4000, IN4000PE

• 0.01μm Hollow Fiber Micro Filter for the IN6430 ionizing gun
• Excellent Particle Removal Efficiency
• Compact and Light Weight
• Quick and Convenient Filter Change
• Precision Cleaned Product