srm200-surface-resistnace-meter-1
wolfgang-warmbier-srm200wolfgang-warmbier-srm200-surface-resistance-meter-backSRM200-calibration-with-veriboxSRM200-in-use

Warmbier SRM200 Pocket Digital Surface Resistance Meter

Buy Now

Item #: 7100.SRM200K

  • Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative
  • Test range: 10^3-10^12
  • Stores test data that can be accessed via USB 
  • Measures temperature and humidity
  • Test voltage: 10V/100V(automatic ranging)
  • Built-in resistivity probes
  • Carrying case & calibration certificate included
    • 0 $
Quantity:

Description

Full featured digital Surface Resistance Meter with data storage, temperature and humidity testing!

SRM200 is a very useful instrument for checking surface resistance and resistance to ground. The instrument can be used on different work surfaces, floors, chairs, carts, clothing and packaging materials, etc. The measured value is displayed with LED display that indicates whether the value is conductive, dissipative or insulating. All readings can be stored in the instrument and can by using the included software easily transferred to PC via USB cable.

The measurements can be performed either with the built-in measurement electrodes (fitted with conductive rubber for good conductivity) on the underside of the instrument or preferably together with a measuring electrode SR0065. Performed measurements with external measuring electrode met the requirements of ANSI ESD S20.20 and IEC61340-5-1. SRM 2000 also has integrated temperature and humidity sensor.

Operation Description

7100-srm200-operation-diagram

LCD Display

SRM200 LCD Overview

Maintenance

Battery condition is permanently monitored in the LCD display. Connect the instrument to a computer or use the power supply to charge the battery in time. The unit won’t switch on if the battery is damaged. Unscrew the battery lid at the backside of the unit to replace the battery. Replace only a rechargeable battery of the same type and take care of the polarity.

Data Logging and Report Export

All readings can be stored in the SRM200 built-in memory and which can be easily transferred to PC via USB cable.  The measurement data can be filtered and exported to a CSV file.
SRM200 Data Report

A measurement report can be produced with the following data points: Specimen ID, Resistance Classification, Device Serial Number, Resistance, Temperature, Humidity, Date, Min, Max and Comments.

Testing-reportCalibration

The recommended calibration service interval is 2 years.  If you would like to verify calibration periodically, use the Veribox resistor box.  The Veribox contains three resistance values to compare to the SRM200: 10K, 1M and 1 G.  If the SRM200 measures the correct resistance, calibration is verified.

Additional information

Type

Surface Resistance Meter

Capabilties

Resistance to Ground, Resistance Point to Point, Resistance

Voltage

10V/100V(automatic ranging)

We have resellers for this product but we have not posted website referal links at this time. You can contact us phone or by adding this item to your quote using the "Add to Quote" Button above. We will get you the information you need. Thanks!

You may also like…

Translate »