New Product

Transforming Technologies is proud to announce the addition of the IN3425PE Hands Free AC Ionizing Nozzle with Photoelectric Eye to our line of ESD Products.

The IN3425PE is a very stable, pin-point accurate ionizer with a photoelectric eye that controls power and air flow.

The Model IN3425PE 68KHz AC ionizing air nozzle is a point-of-use solution for a wide range of static problems. A proximity sensing photoelectric eye controls the power and air flow for easy hands free ionization. The IN3425PE easily connects to a com-pressed air source and offers various output nozzles for specialized applications.

Using AC corona technology to make the air more conductive, Ptecâ„¢ ionizers pro-duce a balanced stream of positive and negative air ions that never need calibration. The main unit of the device is equipped with a small HV power unit so no external HV power unit or HV wiring is needed. The IN3425PE is light, small and free from EMI. It is equipped with an auto ion bal-ance and abnormal HV monitoring systems. These devices are used in many industries and manufacturing applications where static electricity is a problem.

Maintenance Savings
Ptecâ„¢ ionizers save time and money because they require no calibration. Emitter life is increased and maintenance fre-quency is reduced, due to 68KHz AC ion emission.

For price and availability on the IN3425PE Hands Free AC Ionizing Nozzle with Photoelectric Eye or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the Comfort Dome ESD Anti-Fatigue Mat to our line of ESD Products.

The Comfort Dome ESD Anti-fatigue matting is offers unmatched operator comfort.

Transforming Technologies Comfort Dome ESD Anti-Fatigue is a 100% rubber molded mat that provides unparalleled comfort in areas where static control is a concern. Evenly spaced domes on the surface of the mat provides superior anti-fatigue relief and slip resistance. These mats are available in single work-area mats sized 2’x3′ and 3’x4′ or in 3’x4′ interlocking sections for long assembly lines.

The Comfort Dome ESD Anti-Fatigue Mat meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD 4.1.

For price and availability on the Comfort Dome series mats or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the CC2695P Series Dual Wire Coil Cord with Parking Jack to our line of ESD Products.

The CC2695-P’s polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance. The molded snap head provides a convenient parking jack for the cord with not in use. Two female snaps, a 3.5mm phono plug and 1 meg resister are standard. Dual blue and black 4 mm sockets help maintain a constant connection and dual wire wrist straps provide redundancy. When used with resistive loop (dual wire) monitors, the CC2695P wrist strap sets continuously verify resistance to ground. Available in 5′, 10′, and 20′ feet lengths.

For price and availability on the CC2695-P series coil cords or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Transforming Technologies is proud to announce the addition of the HG9000 Series ESD Non-Marking D-Ring/Elastic Sole Grounders to our line of ESD Products.

Sole Grounders, or Foot Grounders, cover more of the shoe which allows more contact to the ESD floor during the process of a step.

The HG9000 series non-marking D-ring/elastic sole grounder provides a more complete path to ground than regular heel or toe grounders due to a wider and more consistent contact area. The HG9000 series will not mar shoes or floors – reducing maintenance costs of touching up on floors. Available in XS, S, M and L sizes.

ESD Sole Grounders (or ESD Foot Grounders) have over 20 times the surface contact of standard esd heel straps. This surface area advantage extends the life of the Sole grounder over standard heel grounders which fail over time due to even the slightest contamination, necessitating replacement or cleaning, wasting time, and costing money.

These sole grounders provide rapid and complete static dissipation due to constant contact through entire walking motion. Wearing the conductive ribbon inside the shoe or sock assures proper electrical contact with the user. A rugged 1 meg ohm buried resistor is standard. Heel grounders are worn on both feet to provide consistent grounding while in motion.

 Features

• Non-Marking
• Buried Resistor
• Full Sole Coverage Design

For price and availability on the HG9000 series soles grounders or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Learn more about Transforming Technologies EFM115 Electrostatic Fieldmeter.

Transforming Technologies is proud to announce the addition of the FM2525NR Ground Cord to our line of ESD Products.

Transforming Technologies FM2525NR is a straight cord with male snap fasteners at each end and no resistors. Used to interconnect two monitored work surfaces.
The FM2525NR comes with two molded low profile mushroom caps with 3/8″ (10mm) male snaps ensure a secure connection to mats. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1

Specification

• Cord Length: 10’
• Snap: FM2525NR: two 10mm (3/8”), Male
• Wire Insulation: PU/PVC
• Resistor: FM2525NR: No Resistor
• Color: Black

For price and availability on the FM2525NR or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email eric@transforming-technologies.com.

Transforming Technologies has long lasting Cup Style ESD Heel Grounders in Color you want and with protection you need!

Call Transforming Technologies at 419-841-9552 or email sales@transforming-technologies.com for a quote today!

Transforming Technologies is proud to have our new MTT Series Textured ESD Matting featured on the Q Source Resource blog.  For the full article follow this link:http://blog.qsource.com/2012/07/transforming-technologies-new-mats.html

QSource.com currently features these durable mats in full rolls of the following sizes and colors:

• MTT2440: 2-Layer Rubber – Full Roll – 24″ x 40′ – Nasa Blue, Royal Blue, or Gray
• MTT3040: 2-Layer Rubber – Full Roll – 30″ x 40′ – Nasa Blue, Royal Blue, or Gray
• MTT3640: 2-Layer Rubber – Full Roll -36″ x 40′ – Nasa Blue, Royal Blue, or Gray
• MTT4840: 2-Layer Rubber – Full Roll – 48″ x 40 – Nasa Blue, Royal Blue, or Gray

This series of work surface mats are also available in pre-cut sizes (which include grounding hardware and common point ground cords) or custom sizes. Please contact Q Source for pricing and purchasing information or for other providers please visit our Authorized Distributor page.

Transforming Technologies is proud to announce the addition of the 5049 Series ESD Jackets and Lab Coats to our line of ESD Products.

The 5049 Series Garments are constructed with an anti static polyester and cotton fabric blend, making the jackets effective as an ESD control device and extremely comfortable to wear. Superior workmanship provides reliable panel-to-panel continuity of the garment. The 5049 Series Garment maintains consistent continuity readings for up to 100 wash cycles.

The 5049 Series is available in a waist length jacket or a full length lab coat.  The standard sleeve termination is a three snap adjustable fit cuff (ESD knit cuff with snap-to-ground feature is also available).

Features

• Extremely comfortable blend of polyester and cotton fabric
• Waist length jacket or full length lab coat
• Reliable panel to panel continuity

For price and availability on the 5049 Series Garments or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email eric@transforming-technologies.com.